Loading ...
Loading ...
Loading ...
Time Code Playback
Time code or user’s bit recorded on an SD card can
be displayed on the LCD monitor or viewfinder.
Memo :
0
The time code is also superimposed on the
video
signal
output from the [SDI OUT] terminal.
0
If a section without time code is played back, the
time code will stop. However, playback will
continue.
Displaying Information during Shooting
During playback, pressing the [DISPLAY] button
shows the display screen. Pressing the
[ONLINE/3] button during shooting switches the
display information between camera information
display, GPS display and turning off the display.
0
The GPS display displays information on the
recording location of the video being played
back only when GPS information has been
recorded.
0
Camera information display displays only
information of Gain, Iris, Shutter and White
Balance that have been recorded.
.
5600K
1/100
F1.6
0
dB
+35.483197
+139.652172
GPS Display
Camera Information Display
Display Off
Memo :
0
Trimming information is displayed while
trimming is in progress. In this case, pressing the
[ONLINE/3] button does not switch the display.
Playing Recorded Clips
101
Playback
Loading ...
Loading ...
Loading ...