Loading ...
Loading ...
Loading ...
Safety Instructions
9/33
1.3 General safety information
WARNING
While operating electrical machines, certain parts of them are inevitable alive dangerously or
under mechanical stress.
Due to their electrical and mechanical functional properties, machines can cause severe injuries
and damage to property. This particularly applies in the event of incorrect use, operation or
maintenance, or in the event of unauthorized interventions!
All electrical work must be performed by a qualified electrician. All mechanical work must be carried
out according to instructions (see Maintenance / Repair). The device may be operated only by
qualified personnel who have read and understood the operating instructions.
The operator must be provided with information, instructions and training on the materials to be
absorbed, including a secure procedure for removal of the absorbed material, before use.
All notes and data on the machines must be observed!
Faultless and safe use of this machine includes correct transport and storage, as well as operation
in accordance with regulations and careful maintenance!
This device is not intended for being used by persons (including) with limited physical, sensory or
mental skills or lack of experience and/or lack of knowledge except if they are supervised by a
person responsible for their safety or were instructed in how to use the device by this person.
Children should be supervised to ensure that they do not play with the device.
• Operation of the device is only permitted on underground sloping no more than 10° and with
sufficient load-bearing capacity.
CAUTION
Only use with safety shoes (acc. to EN ISO 20345)
• Do not place any limbs between parts to be joined during assembly of the machine parts. When
moving the parts, pull limbs from tightening spaces in time.
• Make sure that the power supply cord is not damaged by being run over, crushed, tugged etc..
Stop the industrial vacuum cleaner immediately if necessary!
• The power supply cord must be regularly inspected for signs of damage or ageing!
• Connectors of power supply cords must at least be splash-proof!
• Starting without a filter or with a damaged filter is not allowed
The suction device must not be operated if wear is detected on fasteners or mounting brackets.
Please arrange for a service immediately, or send the industrial vacuum cleaner for repair to:
Kärcher Industrial Vacuuming GmbH
Abt. Service
Robert-Bosch-Straße 4-8
73550 Waldstetten
Tel: ++49-7171-94888-23
Loading ...
Loading ...
Loading ...