Loading ...
Loading ...
Loading ...
Initiation
15/33
6 Initiation
CAUTION
6.1 Initial commissioning
Attention:
• Have electrical work performed by an electrician!
• Set up the device at a regular room temperature, in the dry, on a level area, not outdoors! Latch the
two casters.
• Before commissioning, ensure that the device is assigned enough standing space with the
corresponding safety distance for work and maintenance.
• Testing: The operating voltage of the device is equal to that of the grid. Only then plug in the mains
plug.
• The main switch on the control box serves switching on and off. Red pushbutton pushed (switch
position=0), then the deduster is off. Green pushbutton pushed (switch position=1), then the
deduster is on.
Attention:
• Check motor rotating direction before commissioning! For direction indication, see red arrow
(motor housing). If the rotating direction is incorrect, reverse polarity of the device in the mains plug
with the included phase inverter. Turning the pins integrated in the insulation part of the plug with a
screwdriver changes the rotating direction of the fan drive. The wrong rotating direction causes
overheating, lower air volume flow and a lower extraction output.
WARNING
The machine must only be operated in TN grids with earthed neutral conductor!
6.2 Connection to an extraction source (e.g. processing machine)
• Before connecting the device to the processing machine, a function test must be performed according
to the later monthly inspection.
• The device must be firmly connected to the extraction source with a hose/pipe system (processing
machine).
• When connecting an extraction hose, ensure that only electrically conductive hoses are used and that
the electrical connection between the hose and socket is impeccable. If a "spiral hose" is used, the
metal spiral must be stripped and pushed against the wall of the extraction socket with a pipe clamp
after pushing on the hose (earthing option).
• After connection of the extraction hose (and poss. the accessories) to the processing machine, the
deduster is started up first Push the green pushbutton at the main switch (switch position 1), then
switch on the processing machine.
• When switching off, observe the reverse order. First switch off the processing machine, then push the
red pushbutton at the main switch of the deduster only (switch position 0) (switch off).
• Generally, additional hose length and accessories always mean additional pressure loss. The best
working conditions are present when a dust/chip source is connected to the suction device directly by
the shortest possible hose connection!
• During operation, the site of the machine must not be changed!
Loading ...
Loading ...
Loading ...