Loading ...
Loading ...
Loading ...
Maintenance/Repair
23/33
9 Maintenance/Repair
Before starting work remove the plug from the wall socket!
9.1 Maintenance regulations
NOTICE
• Careful and periodical inspections and maintenance works are necessary to enable an early detection
and elimination of possible errors before they cause bigger problems and damages.
• Ringler assumes liability and guarantee only in case of proper use and compliance with the following
maintenance instructions.
Suitable work gloves must always be worn when carrying out maintenance and service tasks,
in order to prevent injuries and soiling with contaminated substances
WARNING
• These works may only be carried out by an electrician.
• When replacing or repairs the facility all earth conductors are connected again!
9.2 Maintenance intervals table
Interval
(for 1-shift operation)
Check
Maintenance work
Daily
Device or parts of it for damage
visual inspection
Cable connection for damage
visual inspection
Is there a dust/chip bag in the
container?
visual inspection
Monthly
Minimum volume control (yellow
warning lamp)
Function test
Can leaks be found at the filter
(dust vanes)
Safety inspection
Annual
Filter cartridge
Replace filter cartridge on
demand
Bearing of the suction turbine
Replace bearing on demand
Visual inspection whether there
is any dust deposited in the fan
room; remove dust if required.
Loading ...
Loading ...
Loading ...