Loading ...
Loading ...
Loading ...
Accu-Steam™ Installation and Owners Manial
MP5004-1202 PAGE 18
GETTING STARTED
Please read and comprehend all instructions and manuals provided with each Drop-
In-Griddle. Read and understand all safety warnings and operator instructions for all
powered tools required to complete the installation of the Drop-In-Griddle. Disconnect
all power from house supply connection boxes at the appropriate fuse panel
and label the breakers “In service”.
This is to warn others that work is in process, preventing accidental electrocution.
TYPICAL TOOLS AND SUPPLIES REQUIREMENTS
• Putty knife
• Grease solvents
• Clean sponges or rags
• Latex gloves
• Caulking gun
• Approximately 3oz. NSF-approved aluminized silicone sealant
• Tape measure
• Carpenters square
• #2 Phillips screw driver
• Channel lock pliers
• ½ inch box/open wrench
• 3/8 inch nut driver
• 3/8 inch electric or cordless drill
• #25 drill bit
• 3/8 inch drill bit
• Saber saw with metal cutting blades
• Permanent marking pen, preferably a “Sharpie” ne point.
• 4 inch grinder. (If replacing an existing competitors griddle, it is recommend to use
a 4 inch grinder to clean off any welds, welded on brackets or framing attached to
the counter top.)
LIST OF PACKAGING REQUIREMENTS:
• (1) Owners/Installation Manual
• (1) Griddle Module
• (1) Control Panel Module
• (1) Cable Assembly
• (4) Grease Spout Extension
• (1) Grease Trough Assembly
• (1) Grease Tray Assembly
• (1) Grease Trough Hanger Bracket
• (1) Grease Trough Hanger
• (8) 10-24 x 3/8 inch Self-Tapping Truss Head Screw
• (6) 10-24 x ½ inch Phillips Round Head Machine Screw
• (2) 5/16-18 X ¾ inch Carriage Head Bolt
• (2) 5/16 inch Lock Washer
• (2) 5/16-18 Hex Nut
• (8) 1/4-20 Nyloc Nut
• (4) Retainer Bracket
INSTALLATION (cont.)
MODEL EGD
Loading ...
Loading ...
Loading ...