Loading ...
Loading ...
Loading ...
8
SLICING OR GRATING IN THE PROCESSOR BOWL
Use the discs to slice and grate ingredients such as vegetables, fruit and cheese.
CAUTION: The slicing and grating discs are very sharp. Use caution when handling and storing.
1. Ensure the black spindle is in position.
NOTE: The white centre post must not be in place in order for the disc to fit into the
processor bowl to function.
2. Lock the processor bowl into position. (see page 5).
3. Carefully place the desired disc on the black spindle. Place disc with grating or slicing
blade just to the left of the food chute to allow the disc one full rotation before coming in
contact with the food.
• For fine grating, fit the fine grater, with the rough side on top.
• For slicing, the slicing blade must be on top of the disc.
• For coarse grating, the slicing blade must be on the bottom of the disc.
CAUTION: The disc attachments are very sharp. Use caution when handling and storing.
4. Place the lid on the processor bowl and lock into place (see page 5).
5. Add food into the food chute and place the food pusher on top to use as a guide.
6. Switch the motor unit on the desired speed setting using the speed control. Refer to the
Speed Selection Guide on page 13 for ideal speed settings to match your processing task.
7. Press lightly but rmly on the large or small food pusher to guide food through the
processor.
CAUTION: Never use your fingers to direct food through chute.
NOTE: Heavy pressure on the food pusher does not speed up the work; use the food
pusher only as a guide. Let the processor do the work.
NOTE : Do not let the processor bowl overload – stop and empty it when it gets half full.
8. When nished, turn the speed control to the ‘O’ off position and wait until the disc stops
moving.
IMPORTANT: Be sure the disc has completely stopped spinning before removing lid from
processor.
9. Switch the power off and remove the plug from the wall power outlet.
10. To remove the lid hold the food chute and rotate to alignon the processor bowl lid with
on the processor bowl.
11. Carefully remove the disc from the black spindle.
12. To remove the processor bowl, hold the handle and rotate to alignon the processor bowl
with on the motor unit and lift off the motor unit.
NOTE: Remove the processor bowl from the motor unit before removing the disc to
prevent food from leaking through the centre opening of the processor bowl.
13. Empty the processor bowl.
Loading ...
Loading ...
Loading ...