Loading ...
Loading ...
Loading ...
Problem solving guide
78
Replacing the condensed
water spray jet
When certain programmes are being
used, water is taken from the
condensed water container and
sprayed into the drum. The spray jet
can sometimes stop working.
Limescale deposits have built up on
the spray jet.
Remove the spray jet and replace with
a new one (optional accessory).
You can only replace the spray jet
using a special tool. The special tool is
supplied with the new spray jet.
Using the wrong tool can cause
damage.
It can damage the spray jet or the
tumble dryer.
Only use the tool supplied. Do not
use any other tool.
Open the tumble dryer door.
The spray jet is located in the top left of
the door opening.
Attach the tool to the spray jet.
Turn the tool anti-clockwise to
unscrew the spray jet.
Insert the new spray jet in the tool.
Turn the tool clockwise to screw the
spray jet securely in position.
The tumble dryer must not be
operated without the spray jet fitted.
Loading ...
Loading ...
Loading ...