Loading ...
Loading ...
Loading ...
Condensed water container
56
Filling the condensed water
container
When certain programmes are being
used, condensed water generated
during drying is recycled and sprayed
into the drum via a spray nozzle.
The condensed water container must
therefore be filled to at least the
―min― mark. Otherwise, this could
cause a fault.
The ―min― mark is on the front left-
hand side of the container. If you have
set the appliance up so that condensed
water is drained away, the condensed
water container will be empty.
Check the fill level of the condensed
water container.
Only fill it with commercially available
condensed water (for ironing).
You should only use mains water in
exceptional circumstances.
If mains water is used frequently,
limescale can build up on the spray
jet in the door opening.
1 spout, 2 rubber seal
Pour the condensed water through
the rings on the spout 1.
The spray jet in the door opening
may clog.
Only fill with clean water. Do not add
fragrances, detergents or other
substances.
Cleaning the rubber seal
If mains water is used frequently,
limescale deposits can build up on the
rubber seal 2.
Use a damp cleaning cloth to
carefully remove any limescale
deposits from the rubber seal 2.
Loading ...
Loading ...
Loading ...