Loading ...
Loading ...
Loading ...
Settings
104
Appliance parameters
Airways indicator
Fluff must be removed after every
drying programme. In addition, this
indicator will remind you to clean the
filters when a certain amount of fluff
has collected in them:
Clean the fluff and plinth filters. See the
operating instruction manual for more
information.
You can decide at what level of fluff
this reminder should be given.
Options
You will have an idea of how often this
should be done after a few drying
programmes.
- Off
The reminder does not appear.
However, if there is a very severe
blockage in the ducting, the
programme will be cancelled and the
fault message
Clean the fluff filter. Check the
airways. will appear in the display
regardless of this option.
- Heavy
The reminder only appears when
there is a heavy build-up of lint.
- Normal (factory default setting)
- Light
The reminder appears when there is
only a small build-up of fluff.
Conductivity
This setting is only relevant for regions
with very soft water.
Very soft water can result in
unsatisfactory drying results.
You should only select this setting if
the water used for washing the
laundry is extremely soft with a
conductivity reading (electrical
conductivity) of less than 150μS/cm.
Contact your local water authority for
the conductivity level of your mains
water supply.
Options
- Normal (factory default setting)
- Low <150mS (only for regions with
very soft water)
Loading ...
Loading ...
Loading ...