Loading ...
Loading ...
Loading ...
kVAr='llI_/ II=1_V=al_[_
Customer Responsibilities
5_ore Every Every Every Every Every,
_eh 8 _-0 100 180 500 Yearly
JSe hOUP3 hours houP3 hours houi_
Check Safety Valve •
Drain Tank •
Check Oil •
Change Oil •_ •_
Unusual Noise and/or
Vibration •
Air Filter •_
Drive Belt-Condition •
Motor l=ulley/Flywheel alignrnen •
Air compressor pump intake •
and exhaust valves
Inspect air lines and fittings •
for leaks
HeadBolts - Check the torques of tie headbolts after tie first fivehours of operation,
1- more frequent in dusty or humid conditions
2- more frequent if humidity or operating conditions are extreme.
Risk of Unsafe Operation. Unit cycles automatically when
power is on. When sarvioing, you may be exposed to
voltage sources, compressed air, or moving parts. Before servicing unit
unplug or disconnect electrical supply to the air compressor, bleed tank
of pressure, and allow the air compressor to cool.
To ensure efficient operation and longer life of the air compressor outfit, a
routine maintenance schedule should be prepared and followed, The following
routine maintenance schedule is geared to an outfit in a normal working
environment operating on a daily basis. If necessary, the schedule should be
modified to suit the conditions under which your compressor is used. The
modifications will depend upon the hours of operation and the working
environment, Compressor outfits in an extremely dirty and/or hostile
environment will require a greater frequency of all maintenance checks.
NOTE: See "Operation" section for the location of controls,
To Check Safety Valve
Risk of Bursting. If
the safety valve
does not work properly, over-
pressurization may occur, causing
air tank rupture or an explosion.
1.
Before starting compressor, pull
the ring on the safety valve to
make sure that the safety valve
operates freely. Ifthe valve is
stuck or does not operate
smoothly, it must be replaced
with the same type of valve,
17-ENG D_CC9_2
Loading ...
Loading ...
Loading ...