Loading ...
Loading ...
Loading ...
46
WASHER CONTROLS AND SETTINGS
Control options
control lock
To lock or unlock the controls between cycles:
For 7300 Series: Press spin and delay time for
3 seconds.
For 7600 Series: Press spin and allergen.
The control lock icon will show on the LED
display. Use this feature to reduce the likelihood
of accidental operation by children. Washer
cycles will not run when control lock is
activated.
delay time
Use delay or delay time to delay the start
of the washing cycle from 30 minutes to 12
hours. To turn on the delay time option, press
delay or delay time and keep pressing to
scroll through for the desired amount of time
delay and press start. The delay time icon
illuminates on the LED display indicating that
the delay time option is activated. The time
begins counting down on the LED display once
the washer start/pause button is pressed.
7300 Series
7600 Series
Chime
A signal will sound at the end of each cycle
(and periodically during extended refresh) if
option is activated.
To mute or unmute the chime, press and hold
the temp and Soil buttons for 3 sec.
Other Features
LED Display
Icons may vary according to model.
The estimated total cycle time will be
displayed when the cycle is selected. The
time may increase if water pressure is low,
over-sudsing occurs or the load becomes
unbalanced. The approximate time
remaining will be displayed during the cycle.
The eco, control lock, close door, mute
(some models), and delay time will also
appear on this LED display.
Eco indicator
The eco symbol will light up on the LED display
to indicate that the selected combination of
temperature, spin speed and options are eco
friendly.
Oversuds Protection
A situation where over-sudsing has been
detected by the washer will result in the
washer requiring additional rinses until the
suds have been cleared. Each extra rinse
the washer performs to clear the suds will
add approximately 5 minutes to the cycle
duration. The LED will display “SU” followed
by “dS” and then the remaining cycle time (0
min) for 60 seconds and then repeat. Press
cancel to turn off the alert message. The
washer will continue to perform rinse cycles
until suds are dissolved.
(60 sec loop)
Loading ...
Loading ...
Loading ...