Loading ...
Loading ...
Loading ...
44
WASHER CONTROLS AND SETTINGS
hot
Use this setting for heavily soiled white or
colorfast cottons and blends.
warm
Use this setting for normally soiled white or
colorfast cottons or blends.
cool (on select models)
Some warm water will automatically blend
with cold tap supply to achieve a precise
cold. Use this setting for lightly soiled non-
colorfast items, knits, delicates, and hand
washables.
eco cold
Wash and rinse temperatures are equivalent
to temperature of cold tap supply. Use this
selection for fabrics and colors that are
prone to dye transfer. For use with cold
water detergents.
Max (on select models), high, medium and
low (on some models) spin speeds are
available for each cycle. The spin speed
and/or duration of final spin vary from model
to model and cycle to cycle.
Increasing the spin speed will extract more
water, decrease drying time and conserve
energy. Decreasing the spin speed will
reduce wrinkling.
Select low spin speed (on some models) to
gently spin items that should be line dried.
Use no spin to omit the final spin at the
end of the cycle. The load will be very wet.
Remove items from the wash drum to drip
dry or select a spin only cycle to remove
excess water at a more convenient time. See
Cycle Selection for Spin Only option.
Spin speed
Adjust the wash time based on the soil level
of each load. Solid soil (on select models),
heavy, normal, light and extra light (on
some models) soil levels are available.
Soil level
NOTE
The washer will ALWAYS use a small
amount of HOT water to dissolve the pack
when the PODS
®
option has been selected.
Cycle Options
The default options for each cycle will
automatically be chosen when a cycle is
selected. To protect fabrics, not all options
are available for all cycles. If an option is
not available for a cycle, the indicator will
not light.
Selecting Options
Press an option button to select the desired
options for a wash cycle.
Options vary according to model.
All settings or options selected for the cycle,
except sanitize (on select models), perfect
steam
TM
(on select models), allergen (on
select models) and stain treatment options,
will be remembered and recalled each time
that cycle is selected in the future. To return
to factory settings, press and hold soil and
spin buttons at the same time and hold for 3
seconds until the confirmation signal sounds.
To prevent unintentional and accidental
exposure of delicate material to excess heat
or unexpected steam, the sanitize, perfect
steam
TM,
allergen, and all stain treatment
options will need to be reselected each
time.
NOTE
If changes to the settings or options are
attempted after the cycle starts, you will
hear several beeps when the buttons are
pressed. To change settings or options,
press start/pause, make the new selections
and press start/pause again.
PODS® is a registered trademark of Procter
& Gamble Company, Cincinnati OH, used
under license by Electrolux.
Loading ...
Loading ...
Loading ...