Loading ...
Loading ...
Loading ...
36
Verify Reversed Washer Door
Operation
1. Test door for free, smooth swinging
operation and secure latching when
closed.
2. Verify inner door bowl is in the correct
orientation with the “scoop” at the
bottom.
3. Plug in washer and close the door. Test
correct door lock operation by starting
a test cycle: lock should engage, and
door should not be able to be opened
until cycle is paused or canceled.
Reversing the Dryer Door
IMPORTANT
BEFORE YOU REVERSE YOUR DRYER
DOOR:
1. Be sure you have adequate swing area
before reversing door.
2. Gather your tools - including a screw
driver with a #2 square bit and plastic
knife (or small, flat prying tool that won’t
damage paint).
3. Be sure laundry center is unplugged
from power source!
NOTE
Door reversibility is available on all dryer
models.
Tools Needed for Dryer Door
Reversal:
1. Screwdriver with
#2 square bit
2. Plastic knife
1
2
Removing Latch and Hole Plugs
1. Open the door.
2. Remove plastic hole plugs and save to
reinstall later. You may have to use a
non-scratching plastic knife if you are
unable to dislodge the plugs manually.
3. Remove both screws from door
latch. Save latch and screws for re-
installation later.
INSTALLATION
WARNING
FIRE HAZARD
Failure to Follow these instructions may
result in a fire hazard. All steps must be
followed.
Loading ...
Loading ...
Loading ...