Loading ...
Loading ...
Loading ...
30
NOTE:
This conversion should only be carried out by qualified persons. All connections must
be checked for leaks before re-commissioning appliance.
To convert the unit from Underside to Rear entry gas supply, perform the following steps:
1. Remove rear panel,
2. Unscrew universal joint,
3. Remove supply pipe fastening screws from lower mounting bracket,
4. Reposition supply pipe to align with upper mounting bracket,
5. Reconnect supply pipe at universal joint,
6. Fasten supply pipe to upper mounting bracket,
7. Retighten universal joint,
8. Attach the supplied 3/4” Male-Female galvanised elbow at the end of the supply pipe,
9. Replace rear panel.
To convert the unit from Rear to Underside entry gas supply, perform the above steps in reverse.
2. Unscrew
universal joint.
3. Remove
fasteners
from lower
bracket.
6. Fasten supply
pipe to upper
bracket for rear
supply.
8. Attach the
supplied 3/4”
Male-Female
galvanised
elbow.
4. Reposition
supply pipe.
5. Reconnect
supply pipe at
universal
joint.
7. Retighten
universal
joint.
Loading ...
Loading ...
Loading ...