Loading ...
Loading ...
Loading ...
M210/M210-LAB User Manual 72
Labels
Printer will not feed labels. The leading edge of the label roll
is uneven or torn (not a straight
edge).
Locking lever not engaged.
Use a pair of scissors to cut a straight
leading edge on the label roll.
Verify the locking lever is in the correct
position.
Press Print but nothing feeds out Locking lever not engaged.
Damaged label cartridge.
Exit chute jammed.
Verify the locking lever is in the correct
position.
Insert a different label cartridge.
Verify exit chute is not blocked
Compressed print, poor
registration
Dirty platen roller Make sure the last cut label has been
removed from the label tray.
Clean the platen roller. (See page 75
for cleaning information.)
Error - “No / Invalid Cartridge” No cartridge or non-Brady brand
cartridge installed.
Damaged circuit board on
label/media roll.
Verify that Brady media cartridge
installed has the Authentic logo. See
“Brady Label Cartridge” on page 13.
• Replace label/media roll.
• Press [CLEAR/ESC] key to clear error
Error - “Insert labels” Damaged contacts in receiver
slot of lower printer base.
Contact Technical Support.
Printing a symbol produces the
“Cannot Fit” message.
Some symbols cannot print at
6 pt font.
Change the font size to 9 pt or larger.
Error - “Check Cartridge / Lever” Locking lever not engaged.
Cartridge is empty.
Label is jammed.
Verify the locking lever is in the correct
position.
Insert new cartridge.
Remove cartridge, cut off damaged
portion, reinsert cartridge.
Problem Cause Corrective Action
Loading ...
Loading ...
Loading ...