Loading ...
Loading ...
Loading ...
M210/M210-LAB User Manual 5
Power Source
Power is supplied to the printer by six AA alkaline batteries, a Lithium Ion (Li-Ion) battery pack, or by
an AC power adapter.
To maintain maximum printer performance use basic AA alkaline batteries, NOT rechargeable or
Ultimate Lithium AA batteries.
The optional Li-Ion battery pack is rechargeable, but must be removed from the printer and attached to
the AC power adapter for charging to take place.
The AC power adapter is used to recharge the Li-ion battery pack outside the printer, but it can also be
used to power the M210 printer without batteries.
Battery Safety
CAUTION Risk of Explosion if battery is replaced by incorrect type.
Dispose of used batteries according to instructions.
WARNING! Do not attempt to use batteries other than those
recommended in this manual.
WARNING! The M210 battery pack needs to be charged before use.
ALWAYS use the correct charger and refer to the manual
included with the pack.
Do not disassemble or mistreat the battery pack.
Do not attempt to open, damage, or replace components in the
battery pack.
The battery pack should only be used in the M210/M210-LAB
Label Printers and only the battery pack supplied for these
printers should be used.
Keep the battery pack away from sparks, flames, or other heat
sources.
Keep the battery pack away from water.
Never lay objects on top of the battery pack.
Store your battery pack only in a cool, dry place.
Keep the battery pack out of the reach of children.
The battery pack must be recycled or disposed of properly
according to federal, state, and municipal regulations.
Loading ...
Loading ...
Loading ...