Loading ...
Loading ...
Loading ...
Operation
Turning the TV On and Off
Press the POWER(b button on the remote control.
You can also use the POWER(b button on the TV.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
t, Press the POWER button on the remote control.
The message "Menu Language, Store Demo, Channels and Time will be set."
is displayed.
Press the ENTER _ button, then "Select language of the OSD." menu
is automatically displayed. Press the ENTER _ button.
2, Press the • or • button to select language, then press the ENTER E_
button. The message "Select 'Home Use' when installingthis TV in your
home." is displayed.
3, Press the • or • button to select "Store Demo" or "Home Use", then
press the ENTER _ button. The message "Select the Antenna source to
memorize." is displayed.
>- We recommend setting the TV to "Home Use" mode for the best picture in
your home environment.
>- "Store Demo" mode is only intended for use inretail environments.
>- If the unit is accidentally set to "Store Demo" mode and you want to return
to "Home Use" (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU button on the TV for
5 seconds.
4, Press the • or • button to memorize the channels of the selected
connection. Press the ENTER _ button to select "Start".
>- Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Auto: "Air" and "Cable" antenna signals.
>- In Cable mode, you can select the correct signal source among STD,
HRC and IRC by pressing the A, •, • or • button, then press the
ENTER _ button. If you have Digital cable, select the cable system
signal source for both Analog and Digital. Contact your local cable
company to identify the type of cable system that exists in your particular
area.
5, The TV will begin memorizing all of the available channels.
>- To stop the search before it has finished, press the ENTER _ button with
"Stop" selected.
After all the available channels are stored, it starts to remove scrambled
channels (see page 40). And then, the Auto program menu reappears.
Press the ENTER _ button when channel memorization is complete.
The message "Set the Clock Mode." is displayed.
6, Press the ENTER _ button.
Press the • or • button to select "Auto", then Press the ENTER _ button.
The message "Set to daylight saving time." is displayed.
If you select "Manual", "Set current date and time" is displayed.
(See page 45)
7, Press the • or • button to select "Off" or"On", then press the ENTER
button. The message "Select the time zone in which you live." is displayed.
Loading ...
Loading ...
Loading ...