Loading ...
Loading ...
Loading ...
DJI Mavic 3E/3T User Manual
98
©
2022 DJI All Rights Reserved.
• The battery firmware is included in the aircraft firmware. Be sure to update all
batteries.
• Make sure that the battery levels of the aircraft and remote controller are higher than
25% before updating.
• Make sure all DJI devices are connected properly to the computer during an update.
• During the update process, it is normal for the gimbal to go limp, the aircraft status
indicators to blink, and the aircraft to reboot. Wait patiently for the update to complete.
• Make sure to keep the aircraft away from people and animals during a firmware
update, system calibration, or parameter configuration.
• For safety, make sure you are using the latest firmware version.
• After the firmware update is completed, the remote controller and the aircraft may
become disconnected. Re-link them if necessary.
FAR Remote ID Compliance Information
The aircraft complies with the requirements of 14 CFR Part 89:
• The aircraft automatically initiates a pre-flight self-test (PFST) of the Remote ID system before
takeoff and cannot take off if it does not pass the PFST
[1]
. The results of the PFST of the
Remote ID system can be viewed in a DJI flight control app such as DJI Pilot.
• The aircraft monitors the Remote ID system functionality from pre-flight to shut down. If
the Remote ID system malfunctions or has a failure, an alarm will be displayed in a DJI flight
control app such as DJI Pilot.
• The user shall keep the DJI flight app running in the foreground and always allow it to obtain
the location information of the remote controller.
• Developers who develop third-party applications based on the DJI Mobile SDK shall obtain and
display the PFST results and the failure status of the Remote ID system during operation by
calling specific APIs
[2]
.
Footnotes
[1]
The pass criterion for PFST is that the hardware and software of the Remote ID required-data source
and transmitter radio in the Remote ID system are functioning properly.
[2]
For detailed APIs information, please visit https://developer.dji.com/mobile-sdk/
Loading ...