Loading ...
Loading ...
Loading ...
15
23MMP3101REV1.0
28MMP7409REV1.0
OPERATING INSTRUCTIONS
FUNCTION
Pressing the timer button will cycle through the
timer settings: 30 minutes, 1 Hour, 2H, 3H, 4H, 5H,
6H, 7H, 8H, 9H and OFF (00).
The ame speed is only adjustable from the
remote control. Each ame setting has 5 speed
options available. Setting 1 is slowest ranging up
to setting 5 which is the fastest.
TIMER
ICON
DESCRIPTION
FLAME SPEED
This product is equipped with a Safer Plug
®
; an
advanced safety device that helps prevent electrical
res caused from faulty outlets.
Overloading of outlets, adapters and surge
protectors may cause overheating, damage, and
increase risk of res. Safer Plug
®
continuously
monitors the temperature in the plug and outlet
and will turn o the heater to prevent unsafe outlet
overheating.
If the Safer Plug
®
cuts the power due to unsafe
conditions it will show an “ ”message on the
screen. If this occurs the Safer Plug
®
has prevented
a potentially unsafe condition.
To reset the device if this occurs, rst allow the
plug to cool down. Once the plug has cooled down,
unplug the device and wait 5 seconds, then plug
back in and continue to use normally.
If the Safer Plug
®
continues to activate your outlet
may be faulty. Check your heater cord and plug
connections. Faulty wall outlet connections or loose
plugs can cause the outlet or plug to overheat. Be
sure the plug ts tight in the outlet. Heaters draw
more current than small appliances, so overheating
of the outlet may occur even if it has not occurred
with the use of other appliances. During use check
frequently to determine if your plug, outlet or
faceplate is HOT! If so, discontinue use of the heater
and have a qualied electrician check and/or replace
the faulty outlet(s).
SAFER PLUG
®
Loading ...
Loading ...
Loading ...