Loading ...
Loading ...
Loading ...
10
23MMP3101REV1.0
28MMP7409REV1.0
6
H
I
G
H
7
ASSEMBLY INSTRUCTIONS
6. Attaching the back panels
• Locate the Back Side Panels (H) and the Center
Back Panel (I).
• Slide the Back Side Panels (H) into the grooves
between the inner and outer side panels as
shown. Slide all the way down until the Back
Side Panels (H) meet the bottom shelf.
• Slide the Center Back Panel (I) into the grooves
between the inside panels. Slide all the way
down until the Center Back Panel (I) meets the
bottom of the center shelf.
7. Attaching the top panel
• Locate the Mantel Top (G) and align the
pre-installed screws with the screw holes on
the top edges of the main assembly.
• After inserting the screws into the holes, tighten
the fasteners from underneath the Mantel Top
(G) using a Phillips Screwdriver as shown.
8
Hardware Used
AA
BB
x 16
x 16
Screw
Back Panel Bracket
M3x19mm
8. Securing the back panels
• Place the Back Panel Brackets (AA) between
the back panels and the grooves of the
assembly as shown.
• Fasten each Back Panel Bracket (AA) using
Screws (BB). Repeat until all brackets are in
place as indicated by the diagram.
Loading ...
Loading ...
Loading ...