Loading ...
Loading ...
Loading ...
(1) SPARK PLUG CAP
(2) TIE-WRAP
(1) PRIMARY TERMINALS(1) BOLTS
(2) REGULATOR/RECTIFIER
Removal/Installation
Remove the fuel tank/injector assembly.
Remove the spark plug cap.
Remove the tie-wrap and release the spark plug wire from
the fan motor bracket.
Ignition system inspection
Ignition coil inspection
Disconnect the wires from the ignition coil of the terminals
and measure the ignition primary coil resistance between
the primary terminals.
Standard: 2.6 - 3.2 (20˚C/68˚F)
Measure the secondary coil resistance.
Standard:
With plug cap: 17.3 - 22.8 k (20˚C/68˚F)
Without plug cap: 13.5 - 16.5 k (20˚C/68˚F)
Replace the ignition coil if the resistance is out of
specification.
Remove the bolts and regulator/rectifier from the electrical
components support.
Install the regulator/rectifier and condenser in the reverse
order of removal.
6-3
6-3
Electrical servicing
1
2
1
1
2
1
Loading ...
Loading ...
Loading ...