Loading ...
Loading ...
Loading ...
(1) UPPER MOUNTING BOLT/NUT
(2) SHOCK ABSORBER
Shock Absorber
Removal
Remove the air cleaner housing.
Raise the rear wheel off the ground and support it with a
block or maintenance stand under the engine.
Remove the shock absorber lower mounting bolt/nut.
Remove the upper mounting bolt/nut and shock absorber.
(1) LOWER MOUNTING BOLT/NUT(1) AXLE NUT
Apply grease to the axle nut threads and seating surface.
Install the right chain adjuster and axle nut.
Install the drive chain.
If the master link retaining clip was removed, install the
drive chain with the closed end of the clip in the direction
of wheel rotation.
Check and adjust the drive chain slack (page 3-11).
Tighten the axle nut.
Torque: 69 N•m (7.0 kgf•m, 51 lbf•ft)
(1) SPRING COMPRESSOR
(2) ATTACHMENT
(3) SPRING SEAT STOPPER
Disassembly
Loosen the spring lock nut and adjuster.
Remove the lower mounting collars.
Set the shock absorber in the shock absorber compressor
and attachment.
Tools:
Shock absorber compressor 07GME-0010100
– Compressor attachment 07959–MB10000
Remove the stopper ring, spring seat and spring.
Inspection
Check the following items (specification; page 2-4):
– Upper and lower spherical bearing for wear or damage
– Spring for damage and measure the free length
– Damper for oil leakage from the damper rod
– Nitrogen pressure
Replace the damper unit if an oil leak is detected.
5-16
5-16
Frame servicing
3
2
1
1
1
2
1
Loading ...
Loading ...
Loading ...