Loading ...
Loading ...
Loading ...
(1) NEW PADS
(2) PAD PIN
(3) PAD SPRING PIN
Install the new pads and secure with the pin and the
spring pin for the pads.
Install the caliper to the fork so the disc is positioned
between the pads, being careful not to damage the pads.
Apply a locking agent to the caliper mounting bolt threads.
Install the disc cover, then install and tighten the moun-
ting bolts.
Torque: 26 N•m (2.7 kgf•m, 20 lbf•ft)
Operate the brake lever to seat the caliper pistons against
the pads.
(1) BOLT
(2) SPEED SENSOR
(3) SPEED SENSOR BRACKET
Rear Brake Pad Replacement
NOTICE
Before replacing the rear brake pads, remove the speed
sensor.
The speed sensor may be damaged if struck or pulled.
Speed sensor removal
Remove the following:
– Speed sensor bolt
– Remove the sensor from the sensor mount.
Detach the speed sensor from the rear brake calliper for
easier removal.
(1) CALIPER PISTON
Rear Brake Pad Replacement
Remove the rear wheel (page 3-2)
Push the piston all the way in to allow installation of new
brake pads.
Check the brake fluid level in the reservoir as this opera-
tion causes the level to rise.
5-24
5-24
Frame servicing
3
2
1
3
2
1
1
Loading ...
Loading ...
Loading ...