Hoshizaki KM420MWJ KM-420MWJ KM Edge Series 22" Water-Cooled Crescent Cuber Icemaker with 472 lbs. Ice Production Per 24 Hours, EverCheck Alert System, CycleSaver Design and H-GUARD Plus Antimicrobial Agent in

Instruction Manual - Page 38

For KM420MWJ.

PDF File Manual, 41 pages, Read Online | Download pdf file

KM420MWJ photo
Loading ...
Loading ...
Loading ...
38
IV. Preparing the Appliance for Periods of Non-Use
NOTICE
When storing the icemaker for an extended time or in sub-freezing temperatures,
follow the instructions below to prevent damage.
To prevent damage to the water pump seal, do not leave the control switch in the
"PUMP" position for extended periods when the water tank is empty.
When the icemaker is not used for two or three days under normal conditions, it is
sufficient to move the control switch to the "OFF" position. When storing the icemaker for
an extended time or in sub-freezing temperatures, follow the instructions below.
1. Remove the water from the icemaker water supply line:
1) Turn off the power supply, then remove the front panel.
2) Move the control switch to the "OFF" position.
3) Close the icemaker water supply line shut-off valve, then open the icemaker water
supply line drain valve.
4) Allow the line to drain by gravity.
5) Attach a compressed air or carbon dioxide supply to the icemaker water supply line
drain valve.
6) Move the mode switch to the "ICE" position, then move the control switch to the "ON"
position.
7) Replace the front panel in its correct position, then turn on the power supply.
8) Blow the icemaker water supply line out using the compressed air or carbon dioxide
supply.
9) Close the icemaker water supply line drain valve.
2. Drain the water tank:
1) Turn off the power supply, then remove the front panel.
2) Move the control switch to the "OFF" position.
3) Remove the base cover, then disconnect one end of the pump tubing to drain the water
tank. See Fig. 21. After the water tank has drained, reconnect the pump tubing.
4) Remove all ice from the dispenser
unit/ice storage bin. Clean the
dispenser unit/ice storage bin liner
using a neutral cleaner. Rinse
thoroughly after cleaning.
5) Replace the base cover and the front
panel in their correct positions.
Control Switch
Mode Switch
Water Tank
Base Cover
Disconnect This End
of Pump Tubing to
Drain Water Tank
Icemaker
Fig. 21
Loading ...
Loading ...
Loading ...