Loading ...
Loading ...
Loading ...
Page 10
WARNING:
Before cleaning or
performing any maintenance, the tool should
be unplugged from the power supply.
WARNING:
If the supply cord
is damaged, it must be replaced by a
specially prepared cord available through
the service organization.
GENERAL MAINTENANCE
2. Inspect the screws periodically. If the
screws loosen, tighten them immediately, to
avoid serious accident.
3. Clean all parts of the tool; clean dust and
debris from vents. Keep the tool clean, dry
and free of oil or grease.
4. Avoid using solvents when cleaning
plastic parts. Most plastics are susceptible
to damage from various types of commercial
solvents and may be damaged by their use.
Use clean cloths and mild soap to remove
dirt, dust, etc.
LUBRICATION
All of the bearings in this product are
lubricated with a sufficient amount of high
grade lubricant for the life of the unit under
normal operating conditions. Therefore, no
further lubrication is required.
MAINTENANCE
Using compressed air may be the most
effective cleaning method. Always wear
safety goggles when cleaning tools with
compressed air. Periodic maintenance
allows for long life and trouble-free opertion.
A cleaning, lubrication and maintenance
schedule should be maintained.
1.Avoid dropping or otherwise causing
impact to the tool and keep it from oil and
grease.
Loading ...
Loading ...
Loading ...