Loading ...
Loading ...
Loading ...
SPECIFIC SAFETY RULES
FOR ROUTER
Page 4
IMPORTANT SAFETY INSTRUCTIONS
DANGER:
People with electronic
devices, such as pacemakers, should
consult their physician(s) before using this
product. Operation of electrical equipment
in close proximity to a heart pacemaker
could cause interference or failure of the
pacemaker.
WARNING:
Some dust created by
power sanding, sawing, grinding, drilling
and other construction activities contains
chemicals known to the state of California
to cause cancer, birth defects or other
reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
1.Hold power tool by insulated gripping
surfaces, because the cutter may contact
hidden wiring. Cutting a “live” wire may
make exposed metal parts of the power
tool “live” and shock the operator.
2.Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by your
hand or against the body leaves it unsta-
ble and may lead to loss of control.
3.Wear hearing protection during extend-
ed period of operation.
4.Handle the ROUTER bits very carefully.
5.Check the trimmer bit carefully for cracks
or damage before operation. Replace
cracked or damaged bit immediately.
6.Avoid cutting nails. Inspect for and
remove all nails from the workpiece
before operation.
8.Keep hands away from rotating parts.
9.Hold the trimmer bit away from the
workpiece before the switch is turned on.
10.Before using the tool on an actual
workpiece, let it run for a while. Watch for
vibration or wobbling that could indicate
improperly installed bit.
11.Be careful of the rotating direction and
the feed direction of the trimmer bit.
12.Do not leave the tool running. Operate
the tool only when hand-held.
13.Always switch off and wait for the
trimmer bit to come to a complete stop
before removing the tool from workpiece.
14.Do not touch the trimmer bit immedi-
ately after operation; it may be extremely
hot and could burn your skin.
15.Do not smear the tool base carelessly
with thinner, gasoline, oil or the like. They
may cause cracks in the tool base.
16.Use trimmer bits of the correct shank
diameter suitable for the speed of the tool.
17.Some material contains chemicals
which may be toxic. Take caution to
prevent dust inhalation and skin contact.
Follow material supplier safety data.
18.Always use the correct dust mask/
respirator for the material and application
you are working with.
Loading ...
Loading ...
Loading ...