Flymo 9704832-01 EasiGlide 360 Hover Collect Lawn Mower - 1800W Motor, 36cm Cutting Width, 26 Litre Grass Box, Folds Flat, 10m Cable Length, Orange and Grey

User Manual - Page 26

For 9704832-01.

PDF File Manual, 52 pages, Download pdf file

Loading ...
Loading ...
Loading ...
4 Operation
4.1 The ON/OFF button
WARNING: Read the safety
instructions carefully before you start the
product.
WARNING: Keep your hands and feet
away from the rotating blades. Do not put
your hands or feet close to or under the
machine when the blade motor is running.
WARNING: Do not use the product
when persons, especially children, or
animals are in the work area.
Push the ON/OFF button for 3 seconds to switch
on the product. The product is active when the
indicator lamp on the keypad is lit.
Push the ON/OFF button for 3 seconds to switch
off the product.
The product is in power save mode if the indicator
lamp flashes. Push the ON/OFF button for 3
seconds to switch on the product.
4.1.1 The indicator lamp
WARNING:
It is only safe to carry out
inspection or maintenance on the product
when the product is disabled. The product is
disabled when the lamp on the keypad is not
lit.
The indicator lamp on the keypad is an important status
indicator:
The product is active if the indicator lamp lights
continuously.
The product is in power save mode if the indicator
lamp flashes. Push the ON/OFF button for 3
seconds to make the product active again.
The product is disabled when the indicator lamp is
not lit.
4.2 To start the product
1. Open the hatch to the keypad.
2. Push the ON/OFF button for 3 seconds. The
display is lit up.
3. Use the up/down arrow buttons and the OK button
to enter the PIN code.
4. Push the START button to start to mow in the main
area.
Note: If another operating mode is desired, push
the STAR button and confirm with the OK button.
Refer to
Operating modes on page 26
.
5. Close the hatch.
Note:
If the product is parked in the charging station,
the product will only leave the charging station when the
battery is fully charged and if the schedule allows the
product to operate.
4.3 Operating modes
When the STAR button is pressed the following
operating modes can be selected:
Secondary area
Power Cut
Spot Cut
26
- Operation 1411 - 007 - 23.09.2020
Loading ...
Loading ...
Loading ...