Loading ...
Loading ...
Loading ...
8. If the product must not cut grass on a specified
day, unselect the box adjacent to the 2 time
periods.
3.10.3.6 Make an estimate of the necessary operating
time
If the work area is less than maximum product capacity,
the schedule must be set to decrease the wear on the
lawn and the product. The product has a maximum
cutting time each day. You can set the operating time of
the product in the schedule. The operating time includes
cutting, searching and charging. The operating time can
be different because of many reasons, for example the
layout of the work area, the grass growth and age of the
battery. When the product has operated to the maximum
cutting time in a day, the message
Today's mowing
complete
is shown in the display of the product.
The recommended operating times for some work area
examples are shown in the table below. If the result is
not satisfactory, increase the operating time.
Area, m
2
Recommended operating
time, h
250 6-7
500 13-15
750 21-22
3.10.3.7 To copy the schedule setting
1. Do steps 1–3 in
To get access to the schedule
menu on page 21
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Schedule > Advanced
> Overview > Copy
.
3. Use the arrow buttons and the OK button to copy
the schedule setting. You can copy the schedule
settings day to day or for the full week.
3.10.3.8 To reset the schedule setting
You can remove all schedule settings and use the
factory setting.
1. Do steps 1–3 in
To get access to the schedule
menu on page 21
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Schedule > Advanced
> Overview > Reset
.
a) Push the arrow buttons to select
Current day
to only set the current day to factory settings.
b) Push the arrow buttons to select
All week
to
reset all schedule settings to factory settings.
3. Push the
OK button.
3.10.4 Lawn shield
Lawn shield
automatically adjust the cutting time to the
growth of the grass. The product is not permitted to
operate more than the schedule settings.
Note: When using
Lawn shield
, it is recommended to
make as much operating time as possible available for
Lawn shield
. Do not restrict the schedule more than
necessary.
The first operation of the day is set by the schedule
settings. The product always complete 1 mowing cycle,
and then
Lawn shield
selects if the product will continue
to operate or not.
Note:
Lawn shield
is reset if the product does not
operate for more than 50 hours, or if a
Reset of all user
settings
is done.
Lawn shield
is not changed if a
Reset
of schedule settings
is done.
3.10.4.1 To set the Lawn shield
1. Do steps 1–3 in
To get access to the menu on
page 21
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > Lawn shield
> Use Lawn shield
.
3. Push the OK button to select the Lawn shield.
4. Push the BACK button.
3.10.4.2 To set the Lawn shield frequency
Set how frequently the product must cut the grass when
the Lawn shield is in use. There are 3 frequency levels:
Low, Mid and High. The higher the frequency, the longer
the product is allowed to work.
1. Do steps 1–3 in
To get access to the menu on
page 21
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > Lawn shield
> Cutting time
.
3. Use the arrow buttons to select
Low, Mid
or
High
frequency.
4. Push the BACK button.
3.10.5 Security level
There are 3 security levels for the product.
22
- Installation 1411 - 007 - 23.09.2020
Loading ...
Loading ...
Loading ...