Loading ...
Loading ...
Loading ...
en-us HomeConnect®
44
Setting Selection or display Description and additional information
– Not connected to the home network
(Wi-Fi)
– Signal strength 1 (poor)
– Signal strength 2 (moderate)
– Signal strength 3 (good)
Display Wi-Fi signal strength
The setting is only displayed if there is a connection to the
home network (Wi-Fi).
– Not connected
– Connected
Connection to HomeConnect® server
The setting is only displayed if there is a connection to the
home network (Wi-Fi).
1
Factory setting
Overview of the oven HomeConnect® settings
The following HomeConnect® settings are available in the basic settings menu of the oven.
Basic setting Options Description and additional information
Wi-Fi ¡ On
¡ Off
If (Wi-Fi) is activated, you can use HomeConnect®.
In networked standby mode, the oven requires a maximum
of 2W.
Network ¡ Connect to network
¡ Disconnect from network
If you disconnect the oven from the network, all network
information will be deleted. This setting is useful if you have
new login details for the router.
Connect to app - This setting initiates the connection between the
HomeConnect® app and the oven.
Remote control ¡ On
¡ Off
When this function is deactivated, you can only view the
operating status of the oven in the app.
When this function is activated, you can remotely start and
control the oven.
Oven
information
- The display shows information about the network or the
oven.
9.3 Changing the settings via the
HomeConnect® app
You can use the HomeConnect® app to change the
appliance settings and send them to the appliance.
Prerequisits for using the HomeConnect®:
¡ The appliance is connected to the home network and to
the HomeConnect® app.
¡ In order to set the appliance via the app,
HomeConnect® must be activated in the basic settings.
– Activate
in the cooktop basic settings.
– Activate Home Connect ON in the oven basic
settings.
¡ The oven or cooktop must be turned on.
Changing the cooktop settings
1.
Select the setting in the HomeConnect® app and send
it to the cooktop. Follow the instructions in the
HomeConnect® app.
2. If the setting was previously , two steps are required:
‒ If CONFIRM flashes, touch CONFIRM.
‒ If the cooking zone display alternately flashes the old
and new value, select the cooking zone.
3. If the setting was not previously , the old and new
value alternately flash directly on the cooking zone
display.
‒ To accept the setting for the cooking zone, select the
cooking zone.
4. To discard the setting, touch any other touch key on the
cooktop.
Changing the oven settings
▶
Select the setting in the HomeConnect® app and send
it to the oven. Follow the instructions in the
HomeConnect® app.
9.4 Remote start - oven cavity feature
If you want to start an oven operation using your mobile
device, you must activate Remote Start.
WARNING
REMOTE OPERATION This appliance is configurable to
allow remote operation at any time.
▶ Do not store any flammable materials or temperature
sensitive items inside, on top or near surface units of
the appliance.
Loading ...
Loading ...
Loading ...