Loading ...
Loading ...
Loading ...
_i CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
1. Depress clutch/brake pedal fullyand set parking brake.
2. Place gearshift lever in neutral (N) position.
3. Place attachment clutch in "DISENGAGED" position.
4. Turn ignitionkey "OFF" and remove key.
5. Make sure the blades and all moving partshave completelystopped.
6. Disconnectspark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TRACTOR
TO REMOVE MOWER
1. Place attachment clutch in "DISEN-
GAGED" position.
2. If equipped, turn height adjustment
knobto lowest setting.
3. Lower mower to its lowest position.
4. Disengage belt tension rod from lock
bracket.
_CAUTION: Rod is spring loaded. Have
a tight grip on rod and release slowly.
5. Remove retainer spring holding anti-
swaybarto chassis bracket and
disengage anti-swaybar from bracket.
6. Remove four retainer springsfrom
front plate assembly and remove
plate.
7. Remove retainer springsfrom
suspensionarms at deck and disen-
gage arms from deck.
8. Raise attachment lift to its highest
position.
9. Slide mower forward and remove belt
from electric clutchpulley.
t0.Slide mower out from under rightside
oftractor.
TO INSTALL MOWER
Follow procedure described in "INSTALL
MOWER AND DRIVE BELT" in the
Assembly section of this manual.
TO LEVEL MOWER HOUSING
Adjustthe mower while tractor isparked
on level groundor driveway. Make sure
tires are properlyinflated (See =PROD-
UCT SPECIFICATIONS" section ofthis
manual). If tires are overor underinflated,
you will net properlyadjust your mower.
SIDE-TO-SIDE ADJUSTMENT
• Raise mower to its highestposition.
• Measure height from bottomedge of
mowerto groundlevel at front corners
of mower. Distance "A"on both sides of
mower should be the same.
• If adjustmentis necessary, make
adjustment on one side of mower only.
• To raise one side of mower,tighten lift
linkadjustmentnut onthat side.
• To lower one side of mower, loosen lift
linkadjustmentnut onthat side.
NOTE: Each fullturn of adjustmentnut
will change mower height about 3/16".
• Recheck measurements after adjusting.
Suspension
Electric
Belt Tension Rod " Front Mower Clutch Pulley
(Disengage6_-_,, / Bracket
Position)_ Front
Plate
Chassis
Retainer
Sprin!
Anti-Sway
Bar
Springs
er Springs
(Both Sides)
Bracket
22
Loading ...
Loading ...
Loading ...