Loading ...
Loading ...
Loading ...
3. Make sure that the oil level in the transmission oil
tank is between the 2 horizontal lines on the tank.
Max
Min
4. Fill with oil if the oil level is below the lower line, but
do not fill above the top line. Refer to
Technical data
on page 32
for recommended oil.
To lubricate the belt adjuster
The belt adjuster must be lubricated regularly with a
good quality molybdenum disulphide grease.
1. Remove the 2 screws that hold the belt shield and lift
it off.
2. Lubricate with a grease gun through the nipple at the
right side, below the lower belt pulley. Lubricate until
grease is pushed out of the rear side of the nipple.
3. Attach the belt shield and tighten the 2 screws.
Troubleshooting
Troubleshooting schedule
If you cannot find a solution to your problems in
this owner's manual, speak to your Husqvarna service
agent.
28 1686 - 004 - 04.10.2022
Loading ...
Loading ...
Loading ...