Loading ...
Loading ...
Loading ...
Operation before use
Make sure that the cold air intake of the engine is not blocked. Refer to
To clean the cold air intake of the engine on
page 18
.
Make sure that the safety devices are not defective. Refer to
Safety devices on the product on page 8
.
Examine the blades in the cutting deck. Refer to
To examine the blades on page 25
.
Examine and do a test of the brakes. Refer to
To do a check of the parking brake on page 19
and
To do a check of
the forward pedal and rearward pedal on page 8
.
Do a check of the engine oil level. Refer to
To do a check of the engine oil level on page 26
.
Do a check of the transmission oil level. Refer to
To do a check of the transmission oil level on page 27
.
Do a check of the steering wires. Refer to
To examine the steering wires on page 19
.
Make sure that the high beam light and the work light operates correctly (if applicable). Refer to
To start the engine
on page 13
.
X = The instructions are given in this operator's manual. O = The instructions are not given in this operator's
manual. Let an approved service agent do the
maintenance.
Maintenance First
servicing
Maintenance interval
in hours
50 100 200
Do a check of and clean hydraulic hoses and couplings. Replace if necessary. O
Do a check of the belts and pulleys. O O
Do a check of the steering chain of the inner side of the frame tunnel. O
Do an inspection, lubricate and adjust all wires. O
Make sure that the tire pressure is correct. Refer to
Tire pressure on page 23
. X X
Make sure that all screws and nuts are tightened with the correct torque. O
Lubricate the operators seat. O
Lubricate all chains. O
Lubricate the wheels and blade bearings on the cutting deck (if applicable). O O
Lubricate the pedals on the inner side of the frame tunnel. O
Lubricate the belt tensioners O
Remove the drive wheels and lubricate the axels (for 200-300 series only) O
Do a check of the fuel hose. Replace if necessary. O
Replace the fuel filter. Refer to
To replace the fuel filter on page 20
. X
Clean the air filter. Refer to
To remove and install the air filter on page 20
. X
Replace the air filter. Refer to
To remove and install the air filter on page 20
. X
Do an inspection of the cooling fins on the hydrostatic transmission. O
Clean the engine and the hydrostatic transmission. O
16 1686 - 004 - 04.10.2022
Loading ...
Loading ...
Loading ...