Loading ...
Loading ...
Loading ...
3. Turn the knob clockwise to tighten.
CAUTION: Make sure that the long end
of the knob points up.
To engage and disengage the drive
system
To move the product with the engine off, the drive
system must be disengaged. Pull out the drive system
lever fully to disengage the drive on the axle. Push the
drive system lever in fully to engage the drive on the
axle. Do not use middle positions.
The drive system lever for model R 214T, R 214TC,
R 214TC Comfort Edition is found behind the left rear
wheel. Model R 216TAWD has one drive system lever
for the front and one for the rear axle. The drive system
lever for the rear axle is found behind the left rear wheel.
The drive system lever for the front axle for R
216TAWD is found behind the left front wheel.
To lift and lower the cutting deck
To lift the cutting deck to transport position, pull the lift
lever rearward. If the engine is on, the blades stop to
rotate automatically.
To lower the cutting deck to mowing position, press the
lock button and move the lift lever forward. If the engine
is running, the blades start to rotate automatically.
To start the engine
1. Make sure that the drive system is engaged, see
To
engage and disengage the drive system on page 13
.
2. Lift up the cutting deck and apply the parking brake.
1
2
3. Turn the ignition key to the start position.
1686 - 004 - 04.10.2022
13
Loading ...
Loading ...
Loading ...