Husqvarna R 216T AWD R 216T AWD Rider

Operator's Manual - Page 19

For R 216T AWD.

PDF File Manual, 148 pages, Download pdf file

Loading ...
Loading ...
Loading ...
To remove and install the air filter cover
1. Turn the 2 knobs ¼ turn counterclockwise.
2. Remove the air filter cover.
3. Install in the opposite sequence.
To remove the front cover
1. Release the clip on the front cover with the tool
attached to the ignition key.
2. Lift off the front cover.
To remove the right footrest plate
1. Turn the knob on the reverse pedal (A) to remove it.
2. Remove the 3 screws (B) and remove the footrest
plate.
A
B
B
B
B
To remove the left footrest plate
Remove the 4 screws and remove the footrest plate.
To examine the steering wires
The tension of the steering wires can decrease after
a period of time. This causes the adjustment of the
steering to change.
Examine and adjust the steering as follows:
1. The steering wires are correctly tightened if you can
manually move them 5 mm up or down in the groove
on the steering collar.
2. If the wires are too loose, let an authorized service
agent adjust them.
To do a check of the parking brake
1. Park the product on a hard surface that slopes
maximum 10°.
Note:
Do not park the product on a grass slope
when you do a check of the parking brake.
2. Press the parking brake pedal down (1).
3. Press and hold the lock button (2) and release the
parking brake pedal while the button is pressed.
1
2
4. If the product starts to move, let an approved service
agent adjust the parking brake.
1686 - 004 - 04.10.2022
19
Loading ...
Loading ...
Loading ...