Loading ...
Loading ...
Loading ...
9
Conguring the Channels
EFFECTS
1. Touch <EFFECTS>.
2. Tap the EFFECTS button to turn it ON (the button
lights up green).
Selecting a category
3. Touch the EFFECTS CATEGORY button and then
select an eect category.
Category Explanation
GUITAR
Selects eect patches for guitars.
* Only for channel 1
SING
Selects eect patches for vocals.
* Only for channel 1, 2
TALK
Selects eect patches for conversations.
CONSOLE
This eect is shared between channels 1–4.
The parameters can be congured for each
channel.
* Edited settings are saved as-is.
Selecting eect patches
4. Use the PATCH control to select the eect patch you
want to use.
Patch Explanation
PRESET
These cannot be overwritten.
However, you can edit a preset patch and save it
as a user patch.
USER
These can be overwritten.
5. Adjusts the eect parameters.
* For details on the parameters, refer to “Parameter Guide” (Roland
website).
GENERAL
1. Touch <GENERAL>.
2. Set the parameters.
Parameter Explanation
USB AUX IN
Sets whether to input USB audio signals as
auxiliary input (AUX IN) for each channel (ON) or
not (OFF).
INSERT
Congures the input position for the USB audio
signal.
LEVEL
Congures the input level for the USB audio
signal.
REVERB
SEND
Sets the level of the signal sent to reverb from
each channel.
DYNAMICS
REMAIN
NOTE
This function is enabled when the eect category
is set to anything besides “GUITAR”.
When this is set to “ON”, ENHANCE/COMP/NS also
stay on, even when the EFFECTS button is OFF.
When DYNAMICS REMAIN is enabled
When the EFFECTS button is OFF,
this lights up blue.
Loading ...
Loading ...
Loading ...