Loading ...
Loading ...
Loading ...
27
Using a Footswitch and Expression Pedal
1. Select “GA-FC” for the “Specifying a Foot Controller”
(p. 25) operation.
2. Touch <GA-FC>.
3. Touch a control from <PEDAL1> to <EXP2> to select
the switch or expression pedal for which you want
to set the function.
The setting screen appears.
4. Touch <A>–<D> to select a group.
5. Edits the parameter’s value.
* The settings you edit are saved as-is.
PEDAL1–6
Function Explanation
CATEGORY
Select the category.
The functions you can select are dierent for each
category.
FUNCTION
Species the function that’s assigned to the
switches.
Set this to “OFF” if you don’t want to specify a
function.
MODE
TOGGLE
This setting lets you toggle between
MIN and MAX values each time you
press a switch.
MOMENT
The MAX value is used while you are
pressing the switch.
MIN
Sets the lower limit (MIN) and the upper limit (MAX)
of the variable range for the parameter.
* The value changes depending on the function
assigned.
MAX
EXP1–2
Function Explanation
CATEGORY
Select the category.
The functions you can select are dierent for each
category.
FUNCTION
Species the function that’s assigned to the
expression pedals.
Set this to “OFF” if you don’t want to specify a
function.
MIN
Sets the lower limit (MIN) and the upper limit (MAX)
of the variable range for the parameter.
The MIN setting is for when the pedal is fully raised,
and the MAX setting is for when the pedal is fully
advanced.
* The value changes depending on the function
assigned.
MAX
* For details on the parameters, refer to “Parameter Guide” (Roland
website).
GA-FC Settings
There are four groups (A–D) each for the switches (PEDAL 1–6) and the expression pedals (EXP 1, 2). You can assign functions to each
group and control them at the same time.
Loading ...
Loading ...
Loading ...