Loading ...
Loading ...
Loading ...
5
Getting Ready
16
– (Headphones 2–4) jacks
Connect your headphones here.
17
(Channel) 1–4 jacks
Use these jacks for audio input. Connect a mic, keyboard or
analog audio equipment here.
* About phantom power
You can supply phantom power (+48 V) from the Channel
1–4 jacks (XLR). Turn on phantom power when you’re using a
condenser microphone that requires phantom power.
Turn +48 V “ON” in the channel 1–4 settings screen.
* Pin arrangement for the
1–4 connectors (XLR/TRS)
2: HOT
1: GND
3: COLD
1: GND
2: HOT
3: COLD
TIP: HOT
RING: COLD
SLEEVE: GND
2: HOT
1: GND
3: COLD
1: GND
2: HOT
3: COLD
TIP: HOT
RING: COLD
SLEEVE: GND
18
FOOT SW jack
You can control various functions with a footswitch (FS-5U/
FS-6/FS-7), an expression pedal (FV-500H/FV-500L/EV-30 or
Roland EV-5) or a foot controller (GA-FC) that’s connected to
this unit.
* Use only the specied expression pedal. By connecting any other
expression pedals, you risk causing malfunction and/or damage
to the unit.
19
(MAIN OUT) L, R jacks
Connect these jacks to your amp, monitor speakers or mixer.
20
Ground terminal
Connect this to an external earth or ground if necessary.
Inserting a microSD Card
1. Insert the microSD card into
the Micro SD card slot until
you hear it click into place.
NOTE
When inserting a microSD card, take
care that it is oriented correctly, and
push it all the way in. Do not use
excessive force.
Removing a microSD card
2. Press the microSD card inward.
3. Grasp the microSD card and pull it toward yourself.
Turning the Power On/O
Before turning the unit on/o, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/o. However, this is normal and
does not indicate a malfunction
Turning the Power On
1. Press the [Ā] button on this unit.
The power turns on, and the home screen
appears on the display.
2. Turn on the power of your
equipment in this order: connected
devices Ó amp.
Turning the Power O
1. Turn o the equipment in this order: amp Ó
connected devices.
2. Long-press the [Ā] button on this unit (for two
seconds).
A conrmation message appears.
3. Touch <YES>.
Setting the Date and Time
The date and time settings screen appears the rst time you turn
on this unit after purchase.
1. Touch the <–> <+> for YEAR/MONTH/DAY to set the
date.
2. Touch the <–> <+> for HOUR/MIN to set the time.
3. Touch <APPLY> to nish making the settings.
The date and time that you set is now applied, and the home
screen appears.
MEMO
From the menu screen, you can access <SETUP> Ó <GENERAL>
and select “DATE & TIME” to change these settings.
Loading ...
Loading ...
Loading ...