Loading ...
Loading ...
Loading ...
4
Getting Ready
Front Panel / Rear Panel
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
Front panel
10 11 12
10
(Headphones 1) jack
Connect your headset or headphones here. Headsets can only
be used with headphones jack 1.
NOTE
Use a headset with a 3.5 mm CTIA-type mini plug (four-conductor).
* Pin arrangement for mini cable (four-conductor)
11
(Mobile) jack
Use this for inputting audio from a mobile device that’s
connected, such as a smartphone.
12
(Guitar) jack
Connect your guitar here.
The guitar audio is input to channel 1.
Rear panel
13
14
15
19
17
18
16
20
13
DC IN jack
Connect the included AC adaptor to this jack.
* Route the cord of the AC adaptor through the
grooves on the bottom of the unit as shown in
the illustration, to keep it in place.
* When turning the unit over, be careful so as to
protect the buttons and knobs from damage.
Also, handle the unit carefully; do not drop it.
14
ă (USB) port
Connect your computer or other device here to use this unit as
a USB audio interface, or for saving backups of your recorded
data or device settings (p. 30, p. 36).
Ø
See p. 32 for details on the USB output settings, and p. 35 for
the USB audio settings.
* Do not use a USB cable that is designed only for charging a device.
Charge-only cables cannot transmit data.
MEMO
This unit can be powered via the USB port.
A commercially available USB AC adaptor (5 V
/3 A or greater)
is required to power this unit.
15
Micro SD card slot
Insert a microSD card here.
L
R
GND
MIC
Loading ...
Loading ...
Loading ...