Loading ...
Loading ...
Loading ...
8
Conguring the Channels
1. Press the [ ]–[ ] button on the top panel.
The settings screen for the channel corresponding to the
button you pressed appears.
INPUT
Selecting an input source
1. Touch <INPUT>.
2. Touch one of the inputs from <GTR> to <OFF> to
select an input source.
Input source Explanation
Guitar connected to the Guitar jack
* Only for channel 1
–
Mic, keyboard or audio equipment
connected to the channel 1–4 jacks
,
Select these when you want to use channels
1/2 or 3/4 as a stereo link.
When stereo link is turned on, the same
settings apply to both channels.
* Turning on stereo link also automatically
turns one of the channels o.
Built-in mic
Headset mic
* You can set either “INT MIC” or “HEADSET”
for just one channel.
O (no used)
Setting the input gain
3. Use the GAIN control to adjust the input gain.
Turning phantom power on/o
4. Turn the +48V setting to “ON” when you connect a
condenser mic that needs phantom power.
EQ
1. Touch <EQ>.
2. Tap the EQ button to turn it ON (the button lights up
green).
3. Adjust the tonal character of each frequency band.
* For details on the parameters, refer to “Parameter Guide” (Roland
website).
Channel 1–4
Loading ...
Loading ...
Loading ...