Loading ...
Loading ...
Loading ...
44 English
Maintenance
Maintenance
Replacing the Oven Light
The oven light is a standard 40-watt appliance bulb. It comes on when you open
the oven door.
1. Turn off the oven.
2. Make sure the oven and oven light are
cool.
3. Open the door, and remove the glass
cover by turning it counterclockwise.
4. Remove the oven light from the socket
by turning it counterclockwise.
5. Insert a new 40-watt appliance bulb
into the socket, and then turn it
clockwise to tighten.
6. Reinsert the glass cover, and then turn
it clockwise to tighten.
CAUTION
To prevent electric shock, make sure the oven is turned off and cool before
replacing the oven light.
NOTE
• The oven light does not operate during the self-cleaning cycle.
• Remove the racks if they prevent you from accessing the oven light.
To delay starting the self-cleaning cycle
02
04
04
03
1. Repeat steps 1 and 2 on the previous page.
2. Press the Delay Start pad. The oven door locks.
3. Set the time you want the oven to start self-cleaning using the number pad.
4. Press the START/SET pad. The oven will start self-cleaning at your specied time.
To cancel the self-cleaning cycle
You may nd it necessary to stop or interrupt a self-cleaning cycle due to smoke in the
oven. To turn off the self-cleaning cycle, press the OFF/CLEAR pad. The cycle turns off, but
the door remains locked and the Lock icon blinks until the oven temperature falls below
400 °F (204 °C).
After self-cleaning
• The door stays locked until the internal oven temperature falls below 392 °F.
• When the oven has cooled down, wipe the oven surfaces with a cloth to remove ash
residue.
• Stubborn stains can be removed using a steel-wool pad. Lime deposits can be removed
using a vinegar-soaking cloth.
• If you are not satised with the cleaning results, repeat the cycle. "HOT" appears on the
display until the oven cools down. Wait until the message disappears, and then start a
new cycle.
• The cooling fan automatically runs for certain amount of time after self-cleaning.
• Self-cleaning does not operate within 2 hours after running the self-cleaning cycle.
CAUTION
Do not attempt to open the oven door immediately after the self-cleaning cycle is complete.
The oven is still very hot when the door unlocks. Escaping hot air and/or steam could burn
you.
Loading ...
Loading ...
Loading ...