Loading ...
Loading ...
Loading ...
—
®
gL
Enters a Cut Length to
calculate Cut Time.
S
Enters or calculates
Cutting Speed. Unitless entries are assumed to
be Feet in U.S. mode, meters in Metric mode.
Calculates Cutting Speed given entered Diameter
and RPM. Provides tabular Cutting Speed based
on Process, Material, Tooling, Depth of Cut, Width
of Cut and Diameter.
gS
Wire Size — Enters or calculates Wire Size
for 3-Wire Measurements. Calculates the
recommended Ideal, Maximum and Minimum
Wire Sizes given an entered Thread Size.
R
Enters or
calculates RPM (Spindle Speed). Calculates
RPM given entered Diameter and Cutting
Speed. Result is displayed as a whole number.
gR
Enters or
calculates a Three-Wire Measurement. Calculates
the minimum and maximum Three-Wire
Measurements and Pitch Diameters given entered
Thread Size and Wire Size, assuming an External
thread type. If a Three-Wire Measurement value
is entered, the Pitch Diameter calculation is based
on this entered measurement.
T
Enters or calculates
Chipload or Feed per Tooth (IPT), the chip size
of material cut by each tooth. Typically used in
Milling operations. Automatically adjusts for Radial
Chip Thinning, if applicable, when Process is set
to Face or End Milling. Provides tabular Feed per
Tooth based on Process, Material, Tooling, Depth
of Cut, Width of Cut and Diameter.
3844-UG4088E-E.indd 103844-UG4088E-E.indd 10 11/18/2022 6:50:12 AM11/18/2022 6:50:12 AM
Loading ...
Loading ...
Loading ...