Emptying your bin
To release the dirt:
Hold the machine over the bin in a downwards
Firmly push the red bin release button. The bin will
slide down, cleaning the shroud as it goes and the
bin base will open.
The bin base won’t open if the red bin release
button isn’t pushed down all the way.
Press the red wand release button
and pull the wand away from the bin.
To minimise dust/allergen contact when emptying,
cover the clear bin tightly in a dust proof bag while
you empty. Remove the clear bin carefully from the
bag. Seal the bag tightly and dispose.
Be careful not to pull the power trigger
while the clear bin is open for emptying.
To close the clear bin:
Push the bin base upwards until the clear bin
and bin base click into place.
Empty as soon as the dirt reaches
the MAX level – don’t overfill.
Using the machine when the dirt
is above the MAX line may cause
the dirt to reach the filter and
more frequent maintenance
will be required.
Be careful not to pull the power
trigger while the clear bin is open
Cleaning your bin
If it is necessary to clean your bin, empty the bin as
shown in the ‘Emptying your bin’ section.
Press the red button located on the bin runner to
release the bin and slide the bin off the runner.
Clean the bin with a damp cloth only.
Make sure that the bin and seals are completely
dry before replacing.
To refit the bin, insert the spine on to the
Close the bin by pushing the bin base upwards
until the bin and bin base click into place.
The bin isn’t dishwasher safe and the use of
detergents, polishes or air fresheners to clean the
bin isn’t recommended as this may damage your