Loading ...
Loading ...
Loading ...
Hint
As long as the BLUETOOTH function is activated on the Android smartphone or iPhone that has previously been connected with
the neckband speaker, the neckband speaker is reconnected with the Android smartphone or iPhone right after it is turned on.
The above instructions are provided as an example. For details, refer to the operating instructions supplied with your Android
smartphone or iPhone.
When [SRS-NB10] and [LE_SRS-NB10] are displayed for the connection attempt, select [SRS-NB10].
Although [LE_SRS-NB10] is first displayed, wait until [SRS-NB10] is displayed.
It may take about 30 seconds to 1 minute before [SRS-NB10] is displayed.
If [SRS-NB10] is not displayed, repeat the procedure all over again from step
.
If passkey entry is prompted on an Android smartphone or an iPhone, enter “0000.”
The passkey may be called a “passcode,” “PIN code,” “PIN number,” or “password.”
Note
The neckband speaker comes out of pairing mode in about 5 minutes and the indicator on the neckband speaker turns to slow
blue flashing. However, when the neckband speaker has no pairing information, for example when you use the BLUETOOTH
function of the neckband speaker for the first time after purchase, the neckband speaker remains in pairing mode. If the
neckband speaker comes out of pairing mode before you complete the procedure, repeat the procedure all over again from step
.
Once the neckband speaker is paired with the BLUETOOTH device, there is no need to pair them again, except in the following
cases:
Pairing information is deleted in the course of repair work, etc.
The neckband speaker is already paired with 8 devices and another device is to be paired.
The neckband speaker can be paired with up to 8 BLUETOOTH devices. When a new device is paired in addition to 8 paired
devices, the pairing information of the earliest device connected via a BLUETOOTH connection is replaced by the information
If [SRS-NB10] is not displayed on the screen, tap [ ] to change it to [ ], and then tap it once again to
change it back to [
].
Follow the on-screen instructions to establish a BLUETOOTH connection.
When a BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
neckband speaker and the indicator on the neckband speaker starts flashing in blue.
If a BLUETOOTH connection is not established, repeat the procedure all over again from step .
3
31
Loading ...
Loading ...
Loading ...