Loading ...
Loading ...
Loading ...
Help Guide
Wireless Neckband Speaker
SRS-NB10
Connecting the neckband speaker with an Android™ smartphone or an iPhone via a
BLUETOOTH connection
The process to register the information of a target device required for BLUETOOTH connection is called pairing.
To use a device in combination with the neckband speaker via a BLUETOOTH connection, it is necessary to pair the
neckband speaker with the devices on an individual basis.
Before proceeding, make sure of the following:
Bring the Android smartphone or iPhone within 1 m (3.2 ft) of the neckband speaker.
Charge the built-in battery sufficiently.
To avoid any sudden loud sound output from the neckband speaker, turn down the volume of both the Android
smartphone or iPhone and the neckband speaker or stop music playback.
Depending on the Android smartphone or iPhone, the music playback volume may be synchronized between the
Android smartphone or iPhone and the neckband speaker after they are connected via a BLUETOOTH connection.
Bring the operating instructions supplied with the Android smartphone or iPhone at hand for reference.
Put the neckband speaker into pairing mode.
When you pair the neckband speaker with an Android smartphone or an iPhone for the first time after purchase or
after you initialize the neckband speaker (and all the pairing information is deleted from the neckband speaker),
turning on the neckband speaker automatically puts it into pairing mode. In such a case, proceed to step
.
To pair the neckband speaker with a second or subsequent Android smartphone or iPhone (of which pairing
information the neckband speaker has), make sure that the neckband speaker is turned off, and then press and
hold the
(power)/ (BLUETOOTH) button for about 5 seconds until you hear voice guidance (BLUETOOTH
pairing). When the neckband speaker is in pairing mode, the indicator starts double flashing in blue.
Note
Be sure to keep holding the button even in the event that you hear voice guidance (Power ON) in about 2 seconds after you
press and hold
(power)/ (BLUETOOTH) button.
1
Operate the Android smartphone or iPhone to pair with the neckband speaker while, if necessary,
refreshing the device list.
On the Android smartphone:
2
Tap [Settings].1.
Tap [Device connection] - [Bluetooth].2.
Tap [
] to change it to [ ].3.
29
Loading ...
Loading ...
Loading ...