Loading ...
Loading ...
Loading ...
ENGLISH
10
Cleaning
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into aliquid.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from power
source and remove the battery pack before making
any adjustments or removing/installing attachments
or accessories. An accidental start-up can causeinjury.
Your DeWALT product has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
care and regularcleaning.
Mounting the Adjustable Work Light Using
the Threaded Accessory Mounts (Fig. A, K)
WARNING: Since accessories, other than those offered
by
DeWALT, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only DeWA LT recommended
accessories should be used with this product.
If you need any assistance in locating any accessory, please
contact your nearest
DeWALT service center or go to
www.
DeWALT.com.
The DWST08060 is equipped with 1/4 x 20
20
and
5/8x11
21
female threaded mount. This threaded mount is
to accommodate current or future DeWALT accessories.
1. Place the mounting screw of the accessory into the
appropriate threaded mount
20
,
21
and secure the
accessory to the adjustable work light
1
.
NOTE: Follow the directions included with
theaccessory.
2. Ensure the light is securely attached.
Suspending the Adjustable Work Light
(FigA, J)
CAUTION: When the adjustable work light hangs by the
hang hook, do not shake the adjustable work light or the
object from which it hangs. Do not hang the adjustable
work light from any electrical wires or anything that is not
secure. Personal injury or property damage mayoccur.
CAUTION: Only use the hang hook for hanging the
adjustable work light as shown in Fig. A, J. The hang
hook is not intended to support additional weight.
Do not attach or hang anything additional to the
adjustable work light or risk of breakage may occur.
CAUTION: Do not use the hang hook to reach with or
to support your weight in anysituation.
CAUTION: Do not hang overhead. Serious personal
injury or damage to the adjustable work light may
result if the adjustable work lightfalls.
CAUTION: Do not mount the adjustable work light to
theceiling.
NOTE: When using an extension cord to power the
adjustable work light
1
, locate the adjustable work light
1
within reach of an electricaloutlet.
Hang Hook
The hang hook
11
may be used to suspend the adjustable
work light
1
from 2x4 lumber or pipes up to 2-1/2" (64 mm)
diameter.
1. The hang hook
11
folds out from under adjustable
work light
1
. Be sure to fully extend the hang hook
11
beforeusing.
2. To store the hang hook
11
fold it into the hang hook
recess and ensure the hang hook
11
clips into the
hang hook clasp
12
.
WARNING:
Ensure the light panels are facing down before
stacking another ToughSystem 2.0 unit on top of the light
box to prevent possible activation of the LED lights.
This DWST08060 has a storage compartment
15
to carry
your extrabatteries, cords or tools.
The adjustable work light
1
and the storage
compartment
15
are ToughSystem® 2.0 compatible
and can be stacked together or individually with all
ToughSystem®2.0products.
1. To access the storage compartment
15
first unlock
the adjustable work light
1
from the storage
compartment
15
by pressing the stacking latch
13
and then lift the adjustable work light
1
off the
storage compartment
15
.
2. To install the adjustable work light
1
onto the storage
compartment
15
, pivot the adjustable work light
slot
24
into the storage compartment slot
25
. Press
the adjustable work light
1
down and inward until an
audible click is heard. Ensure the adjustable work light
1
is securely held in place.
Storage and Transportation
• Always store with battery removed and disconnected from
the AC power supply!
• Avoid using the DWST08060 outdoors or transporting in an
open vehicle.
• Do not use in rain. Do not expose to rain.
• Store indoors..
• Store the DWST08060 in a place that is as cool and dry
aspossible.
• Store the DWST08060 in a place where it cannot be
accessed by children or unauthorizedpersons.
• Check the DWST08060 for damage before use after long
periods ofstorage.
Loading ...
Loading ...
Loading ...