Loading ...
Loading ...
Loading ...
9
ENGLISH
WARNING: To reduce the risk of fire, keep away
from combustible materials while in operation.
CAUTION: Do not stare into box light lens. Serious
eye injury couldresult.
NOTE: For best results, make sure your battery pack is fullycharged.
1. To turn on the right articulating head LED
3
, press the
right LED On/Off button
2
.
2. To turn on the left articulating head LED
5
, press the left
LED On/Off button
4
.
3. Each articulating head LED
3
,
5
has three brightness
levels, up to 2000 lumens. Continue to press the On/Off
buttons
2
,
4
to change the brightnesslevel.
4. Continue cycling the On/Off buttons until the lights turnoff.
NOTE: The light box is equipped with magnetic sensors.
If the articulating head LED
3
,
5
is stored with the lens
facing the light box, the articulating head LED
3
,
5
will
not turn on and will tun off automatically.
Low Battery Indicator
As the battery nears a fully discharged state, the light will
blink twice. The light will continue to blink twice every 45
seconds until the battery is fully discharged at which time
the light will turn off. Indication time will vary based on
battery packcapacity.
CAUTION: Stop work and replace the battery when
thisoccurs.
Thermal Protection Mode
In cases of overheating, the articulating head LEDs
3
,
5
lumen output automatically switches to the next lower
brightness setting. If the temperature continues to increase,
the light box will power off until a normal operating
temperature is reached.
Positioning the Articulating Head LEDs
(Fig. A, F)
WARNING: Do not to attempt to operate the
articulating head LEDs in the closed position, or
with the lens facing the adjustable work light, as
the surface the light may get hot.
The articulating head LED
3
,
5
piviots up and down 0°–160°
and swivels from 0°–270°.
NOTE: The adjustable work light is equipped with magnetic
sensors. If the articulating head LED
3
,
5
is stored with the
lens facing the adjustable work light, the articulating head
LED
3
,
5
will not turn on and will turn off automatically.
1. To move the left articulating head LED
5
or right
articulating head LED
3
first pull it upwards and away
from the adjustable work light
1
.
2. To adjust the light beam, swivel the left articulating head
LED
5
or right articulating head LED
3
by twisting it into
the desired position.
3. When not in use fold the left articulating head LED
5
or
right articulating head LED
3
with the lens side facing
into the stored position, secured in the adjustable
worklight
1
.
Using the AC Plug (Fig. E)
CAUTION: Only use either a NEMA 1-15R or a
NEMA5-15R power cord.
When not using a battery, you can use an extension cord
plugged into the AC plug
23
to power the adjustable
worklight
1
.
NOTE: The adjustable work light is not a battery charger.
Using the AC plug will not charge your batteries.
1. Pull open the AC plug door
9
to access the AC plug
23
.
2. When a powered extension cord
26
is connected to the
adjustable work light
1
, the green AC LED indicator
18
will illuminate.
NOTE: If a battery is connected to the adjustable
work light
1
when also using an extension cord, the
DWST08060 will only use power from the powered
extension cord.
3. If the articulating head LEDs
3
,
5
is on and AC power
is connected to adjustable work light
1
, the adjustable
work light
1
will automatically switch to AC power
mode without interruption. If the powered extension
cord is removed, and a battery is still connected to the
device, then the adjustable work light will automatically
switch to battery power.
4. To keep the AC plug
23
safe from moisture, remove
the extension cord and then close the AC plug door
9
securely when not in use.
On/Off Switch (Fig. A, G)
WARNING: The lens gets very hot during use. To
reduce the risk of burns, do not touch hot lens.
WARNING: Keep objects at least 20" (51 cm) away
from the lenses when they are in use to prevent
the objects from overheating.
Top Handle (Fig.A)
This adjustable work light
1
has a built in top handle
10
that allows you to carry the adjustable work light
1
when
not attached to the storage compartment
15
.
Carry Handle (Fig.H)
This DWST08060 has a built in carry handle
14
that allows
you to carry the storage compartment
15
when not
attached to a adjustable work light
1
.
Storage Compartment (Fig.I)
WARNING: Avoid overfilling the
storagecompartment.
WARNING:
Do not forcefully attach the adjustable
work light onto the storage compartment. If the
adjustable work light will not fully close or the latches
will not lock easily, ensure the storage compartment is
not overfilled. Remove a few items and try attaching the
adjustable work light again. If needed you can stack the
storage compartment on top of the adjustable work light.
WARNING:
When stacking an additional ToughSystem®
2.0 unit on top of the adjustable work light, the battery
must be removed first, unless it is smaller than 6Ah.
Loading ...
Loading ...
Loading ...