Loading ...
Loading ...
Loading ...
Configuring System Audio 75
The following steps show how you would assign Stage 64 IO ownership to achieve the example configuration.
To configure the IO Sharing Example:
1 Pair each E6L to its S6L control surface.
2 On system 1 go to Options > Devices and do the following:
• Select and Connect Stage 64 1. System 1 becomes the Input Master for Stage 1.
• Select and Connect Stage 64 2. System 1 becomes the Input Master for Stage 2.
• Tap to select Stage 64 2 in the Connected column so it is outlined in blue, then tap the Settings tab in the Information section.
From the pop-up selector for Output slot J, choose Assign Ownership to <E6L Device Name> S6L system (where “E6L De-
vice Name” is the name of the E6L of system 2). Repeat for the remaining Output slots (K, L and M) on Stage 64 2. System 2
now controls all Output slots on Stage 2.
3 On system 2 go to Options > Devices and do the following:
• Select and Connect the Stage 64 3. System 2 becomes the Input Master for Stage 3.
• Tap to select Stage 64 3 in the Connected column so it is outlined in blue, then tap the Settings tab in the Information section.
From the pop-up selector for Output slot J, choose Assign Ownership to <E6L Device Name> S6L system (where “E6L De-
vice Name” is the name of the E6L of system 1). Repeat for Output slot K Stage 64 3. Output slots on Stage 3 are now shared:
System 1 controls Output slots J and K, and system 2 controls Output slots L and M.
4 Proceed to
Setting the System Clock.
Loading ...
Loading ...
Loading ...