Loading ...
Loading ...
Loading ...
Plug-Ins 295
Tips for Using Tap Tempo
The plug-in Tempo Sync switch enables/disables that individual plug-in’s delay value from following the system tempo. Use the
individual plug-in Tempo Sync switches to sync one, some or all delay plug-ins.
Tempos can range from 20 BPM (3,000 ms) to 300 BPM (200 ms). Some delay plug-ins offer different time divisions (such as
1/8th, 16th, or dotted) that you can select for variations based on the system tempo. Check your delay plug-ins to see if they support
Tempo Sync and subdivision settings (most, but not all, do).
Snapshots and Tempo Sync
If you need a specific delay time every time a certain snapshot is recalled, store Tempo with snapshots. For details, see Adding
Tempo Data to Snapshots.
WSG-HD Waves SoundGrid Option Card and Waves Plug-Ins
The WSG-HD Waves SoundGrid Option Card from Avid lets you integrate Waves SoundGrid processing directly into your
VENUE | S6L mixes.
Once the WSG-HD Card is installed in your E6L engine, plug-ins hosted on the Waves SoundGrid server appear on the VENUE
Plug-Ins screen inside of the Waves SoundGrid Rack plug-in (up to 8 plug-ins per instance of SoundGrid Rack). Up to two com-
patible Waves SoundGrid servers can be connected simultaneously for redundancy with automatic fail-over.
Setup and Configuration
Installing and configuring Waves software and your WSG-HD card requires the following steps:
• Preparing and Connecting the VENUE System for Waves Installation
• Downloading and Preparing the Waves Installer
• Transferring Licenses
• Installing on S6L System
• Completing the Installation
Preparing and Connecting the VENUE System for Waves Installation
To prepare your S6L system and connect it to the internet:
1 Make sure you have performed a System Restore to install VENUE software version 5.7 or higher on your VENUE system (see
the VENUE S6L Installation Guide.pdf for instructions).
2 Make sure you have installed the WSG-HD Card in your E6L Engine (see the WSG-HD Card Installation guide, included with the
card and available for download from your Avid account).
3 Make sure you have connected the WSG-HD card to your SoundGrid server(s).
4 Make sure you have a USB flash drive (formatted to FAT32) and a Windows computer connected to the internet (to unzip Waves
software and create USB installers).
5 (Optional) If you plan to transfer licenses directly to your S6L control surface, make sure to connect the control surface to the
internet via the ECx port.
At the time of this writing a Windows computer is required to unzip and create installers. Macs with VMWare Fusion, Parallels and
similar are also supported. You can download the installer from a Mac but you must extract it from a Windows computer or from
a Mac running Windows on VMWare Fusion, Parallels, or similar.
Loading ...
Loading ...
Loading ...