Loading ...
Loading ...
Loading ...
Adjusting Channel Parameters 114
Pan/Balance/Width
Pan adjusts channel pan (for mono channels) and stereo balance (for stereo channels). On stereo channels, width controls are also
provided. You can adjust pan controls for input channels, Aux outputs and Group outputs in Channel Control and Channel Strip
modes.
To adjust pan in Channel Control mode:
1 Bank to the desired input or output channels.
2 Select a channel, and then press the INPUT Channel Control Function switch on the associated CKM.
– or –
• On the associated CTM, touch the Input touch zone for the desired channel.
3 Rotate the encoder under the display showing Pan (mono channel) to adjust pan, or Balance (stereo channels) to adjust balance.
To adjust pan in Channel Strip mode:
1 Bank the desired input channels.
2 Do either of the following to enable Channel Strip mode:
• Press a lit Select switch to de-select it and enable Channel Strip mode on the associated CKM.
• Press Select Clear to de-select all channels on the control surface and enable Channel Strip mode on all CKMs.
3 If necessary, navigate to the first Channel Strip mode parameter bank by pressing the lit Left Parameter Bank switch until Pan
(or Balance for stereo channels) appears in the bottom row encoder displays.
4 In the column for the channel you want to adjust, rotate the encoder under the display showing Balance.
Stereo Width
Stereo Channels Only
Width adjusts the stereo image of stereo channels by controlling ganged pan positions of the left and right channels, in opposite di-
rections. Width can be adjusted from full L–R, to mono, to full inversed R-L. You can adjust width controls for stereo channels only
in Channel Control and Channel Strip modes.
To adjust width in Channel Control mode:
1 Bank to the desired input or output channels.
2 Select a channel, and then press the INPUT Channel Control Function switch on the associated CKM.
– or –
• On the associated CTM, touch the Input touch zone for the desired channel.
3 Rotate the encoder under the display showing Width.
To adjust width in Channel Strip mode:
1 Bank the desired input channels.
2 Do either of the following to enable Channel Strip mode:
• Press a lit Select switch to de-select it and enable Channel Strip mode on the associated CKM.
• Press Select Clear to de-select all channels on the control surface and enable Channel Strip mode on all CKMs.
3 If necessary, navigate to the first Channel Strip mode parameter bank by pressing the lit Left Parameter Bank switch until Bal-
ance appears in the bottom row encoder displays.
4 In the column for the channel you want to adjust, under the display showing Balance press the encoder Sel switch. Width is
shown in the display, and stereo width is now targeted to the encoder.
5 Rotate the encoder to adjust stereo width.
Loading ...
Loading ...
Loading ...