Loading ...
Loading ...
Loading ...
Working with Aux Sends 138
To spill Aux Sends using the CTM in Meters view:
Touch the Aux Sends touch zone on the associated CTM. The Aux Sends that are spilled are indicated by the channel number
range at the top of the touch zone.
To spill Aux Sends using the CTM in Channel view:
1 If necessary, in Meters view touch the Meters for the channel you want to access in Channel view.
2 Touch one of the three Aux Sends touch zones in the Aux Sends section on the associated CTM. The active zone is bordered in
red. Each zone spills the following Aux Sends to the CKM encoders, as available:
• Zone 1 (topmost zone) spills Aux Sends 1–32.
• Zone 2 (middle zone) spills Aux Sends 33–64.
• Zone 3 (bottom zone) spills Aux Sends 65-96.
To toggle an Aux Send on/off:
Press the encoder under the display showing the Aux Send you want to adjust, such as Aux 1.
On is shown in the encoder display when the send is on. Off is shown when the send is off. On-screen, the thermometer-style
level indicator for each Aux Send lights when Aux Send is on, and is dimmed when off.
CTM Meters view (left) and a closeup of the Aux Send touch zone
Aux Sends touch zones in CTM Channel view (80 Aux configuration shown)
Loading ...
Loading ...
Loading ...